|
Post by Tim on Apr 27, 2019 13:50:13 GMT
I have no output from my Rover Controller. I am just getting this system together. I have had the controller for a week. The Panels are putting out 20v. The battery is 100% (I just have one battery hooked up while I get all the 'plumbing' in place. The controller is charging the battery (12.7 initially-now 13.7). I am getting 0v on the Rover's putput terminals. The controller is showing 0 error codes. Can anyone tell me what is happening? Of course, today is a Sat so Renogy is closed.
|
|
|
Post by bupkis on Apr 27, 2019 13:57:34 GMT
so the output terminals which are directly connected to the battery should measure battery voltage.
Measure a know source like your battery and retry measuring the output terminal (not the load terminals).
The load terminals if that is what you mean as output may need to be turned on in order to be able to measure battery voltage there.
|
|
|
Post by Admin on Apr 30, 2019 15:09:17 GMT
I have no output from my Rover Controller. I am just getting this system together. I have had the controller for a week. The Panels are putting out 20v. The battery is 100% (I just have one battery hooked up while I get all the 'plumbing' in place. The controller is charging the battery (12.7 initially-now 13.7). I am getting 0v on the Rover's putput terminals. The controller is showing 0 error codes. Can anyone tell me what is happening? Of course, today is a Sat so Renogy is closed.
Are you referring to the output load terminals? or the battery output charging terminals? You mentioned your battery is charging so we're assuming it's the load terminal. Is the little light bulb on the screen? Pressing the rightmost button should manually turn this on. -Renogy Team
|
|