Post by Admin on Sept 15, 2018 14:24:03 GMT
Jul 10, 2018 3:21:39 GMT @vanman2 said:
I have the 40 amp commander and 200ah 12v agm battery by renogy.My question is, can this battery be equalized?
I've looked on utube and asked a friend on the same system and he has been running it on sealed setting from his CC, I switched mine to gel due to the huge warning on the second page of the CC manual. The battery spec sheet doesn't state either way for equalization and was hoping to get a firm answer from the source, THANKS!
Jul 10, 2018 11:45:43 GMT @rabird said:
usually the controller's equalization voltage is not much higher than boost voltage.For instance I see controllers with an AGM/Seald charge profile of 14.4v for 2hrs with every 30day 14.6v equalization for 1hr.
I'd use that on AGM and not worry but you have to decide for yourself!
My brother's 400ah AGM bank called for charging to 14.7v and once there reverting to float.
I set his controller to the above profile which has been working fine for ~1yr now.