Post by Admin on Sept 15, 2018 14:45:14 GMT
Jun 27, 2018 21:53:08 GMT @andymon said:
So I got my solar all set up. 100w panel and two 6v deep cell batteries. Controller reading are as follow as it cycles through
12.4v
84 degrees
0v
0.0A
0 KWH
Batteries are reading 12.32v on the volt meter.
Does this look normal?Plus the little battery flashing icon only shows half way.
Jun 28, 2018 1:18:11 GMT @rabird said:
If PV voltage is 0v, look for blown fuse or bad connection. reverse polarity!
PV voltage should never be 0v.
Jun 28, 2018 17:28:45 GMT @andymon said:
Yep. Had the + and - reversed. New readings:
12.4v
72 degrees
12v
3.8A
0KWH
thanks!