|
Post by Admin on Sept 28, 2018 1:50:52 GMT
Hello. I have the Rover charge controller and just purchased a small 24 volt refrigerator. Can I wire it direct to the "load" terminals on the charge controller or should I just wire it direct to my batteries? Thanks for any help You will have less fluctuation of voltage to the CC..... I would wire to batteries, the load terminals are for small loads that are timed like on at dusk ... The CC may be able to measure the load and report via the load terminals but any 'fluctuation' in voltage is the same at the battery or the load terminals. Thanks for the replies. I read in the owner's manual about the timed feature on the load terminals and that is something I won't need so I think I'll just hook it up straight to the batteries. Thanks again
|
|