kdahl
Solar Newcomer
Posts: 2
|
Post by kdahl on Aug 8, 2018 22:59:01 GMT
Hey y’all, I’ve got an Adventurer with two 100w panels on my travel trailer, and yesterday the controller’s lcd screen was blank. I’ve got good voltage at the battery, and a multimeter on the panel leads showed 20v, and have disconnected and reconnected everything. Is there some sort of “hold these buttons for 30 seconds” type reset for the controller that I overlooked in the manual?
|
|
|
Post by bupkis on Aug 9, 2018 0:06:29 GMT
hi kdahl, fuse issue? did the adventurer come back to life with a disconnect reconnect? Not aware of away button sequence, controller generally comes to life when connected to a battery. I'd be on the phone for a replacement, maybe a different company's product.
|
|
kdahl
Solar Newcomer
Posts: 2
|
Post by kdahl on Aug 9, 2018 13:01:13 GMT
Well, good news! The issue was just enough corrosion built up at the battery connection that it broke the circuit. A good cleaning and everything is back up and running
|
|