|
Post by Reflex439 on Nov 23, 2018 20:29:01 GMT
I purchased a BT-1 module and am using it with a Rover MPPT controller. I've got it connected, and I see history going back over 500+ days. How can I clear this so that I only see the revenant data from this point forward? I didn't see anything in the Rover or BT-1 manual. This is a new install, but here is what I see in the history in the App.
|
|
|
Post by playersz28 on Nov 23, 2018 22:30:42 GMT
In the PC software that uses the USB cable under Parameter->Factory Operation you can clear data and/or reset to factory defaults.
Was this a refurb or used unit or something?
|
|
|
Post by Reflex439 on Nov 24, 2018 15:39:24 GMT
In the PC software that uses the USB cable under Parameter->Factory Operation you can clear data and/or reset to factory defaults. Was this a refurb or used unit or something? It was purchased as New from Amazon. So I'm guessing the statistics are in the solar controller, and not the BT-1 or app. That explains the history then. I installed the controller and panel just under two years ago, and the statistics are for 593 days. I'll have to order the PC USB cable and download the software if there is no way to reset it via the controller buttons. Thanks.
|
|
|
Post by playersz28 on Nov 24, 2018 17:48:31 GMT
Oh, you just added the BT1. Explains the data I have the Rover but it came with the BT1 and cable when I bought it.
|
|
|
Post by Reflex439 on Nov 24, 2018 21:20:39 GMT
Yes, my BT1 was separate. I got the data reset via the PC, thanks for your help!
|
|