|
|
Post by John Gamertsfelder on Feb 4, 2019 16:58:10 GMT
About two years ago I installed the basic Renogy solar kit consisting of the 100 watt panel and charge controller on my homebuilt 'TOWED HUT'. My storage is 2-Optima 'Red Top" deep cycle batteries. I've just received a new RNG 100D-S panel for installation. I'd like to know how to 'splice' this newer panel feed cable into the original set-up and what other items I need to purchase to accomplish this basic task. Thank you, John
|
|
|
|
Post by bupkis on Feb 4, 2019 19:40:59 GMT
Hi John, if you are using MC4 connectors near the panel then it is easy to use 'Y' splitter so two panels can be connected in parallel with each other. If you go series with a MPPT controller then one panel connects to the next. Y splitter or BRANCH connector www.renogy.com/mc4-parallel-branch-connectors-mmf-ffm-pair/ |
|
len
Solar Newcomer
Posts: 1
|
Post by len on Feb 21, 2019 18:16:06 GMT
Can I mix a 100D panel with two 100p panels. Just bought a third panel and it is a 100D.
|
|
|
|
Post by Admin on Feb 21, 2019 22:13:19 GMT
Can I mix a 100D panel with two 100p panels. Just bought a third panel and it is a 100D. There is no issue with using 100W mono and 100W Poly panels in the same array. -Renogy Team |
|
