|
Post by sunnymcsunface on Feb 12, 2019 17:22:11 GMT
I have a question about the amp-hour setting on the Rover charge controller. I have two 200 AH, 12v batteries connected in parallel, so the system is 400 AH total. Should I set the AH setting on the Rover to 200 AH (what each battery is rated for) or for 400 AH (what the system is rated for) and why?
|
|
|
Post by Admin on Feb 12, 2019 17:36:51 GMT
I have a question about the amp-hour setting on the Rover charge controller. I have two 200 AH, 12v batteries connected in parallel, so the system is 400 AH total. Should I set the AH setting on the Rover to 200 AH (what each battery is rated for) or for 400 AH (what the system is rated for) and why? The AH rating is for overall battery capacity. Since your overall battery capacity at 2 x 12V 200Ah is 400Ah then you should set the total AmpHour to be 400Ah. -Renogy Team
|
|
|
Post by sunnymcsunface on Feb 12, 2019 17:48:54 GMT
Thanks for the quick answer!
|
|