|
Post by cbcalhoun on Jul 15, 2019 12:06:51 GMT
I have several of the UB12750 batteries. I am trying to come to a conclusion if these are acceptable batteries to use with the 30A Wonderer Charge Controller and what mode the controller should be placed in. Should I be setting the system to GEL? The instructions are not real clear on this. Thanks, Chris www.amazon.com/gp/product/B078XN78HT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1The Universal Battery UB12750 (12V, 75AH) Battery is a 12v 75 amp hour sealed lead acid (SLA) AGM battery. This high-quality replacement battery is manufactured to meet or exceed any OEM requirements
|
|
|
Post by tattoo on Jul 15, 2019 12:10:58 GMT
Looks like a gel setting battery to me..........
|
|
|
Post by cbcalhoun on Jul 15, 2019 12:39:28 GMT
|
|
|
Post by tattoo on Jul 15, 2019 14:25:24 GMT
You know it could be more that you drained the batteries to much..........
Way more info is needed to give you a better explanation..........
|
|
|
Post by cbcalhoun on Jul 15, 2019 14:41:56 GMT
I agree and I just don't have that information because it is at a location where others are able to discharge the batteries for charging their R/C airplane/heli batteries. They may have over discharged them while I was not there although that old controller did have a low voltage disconnect which I hoped would prevent that from occurring. The new unit does not so I need to find another way do do a low voltage disconnect.
-CC
|
|
|
Post by tattoo on Jul 15, 2019 19:55:35 GMT
I think you need a larger battery...... That one is very small..... Tell us how many panels you have and more about your system.........
|
|
|
Post by bupkis on Jul 16, 2019 12:14:03 GMT
the correct setting is SLD for sealed AGM
|
|