Post by Admin on Sept 14, 2018 20:30:20 GMT
Jul 16, 2018 17:17:35 GMT Guest said:
I'm having trouble understanding if I can use 2 (two) 30 amp PWM's on one solar system which will let me add more wattage (totaling 60 amp's) to my power bank instead of (30). I have been told I can, but only when the PWM's are placed in series and not parallel. I heard if I run them in Parallel I will decrease the life of not only my PWM's but my battery's as well. I was told one PWM will over work it's self to death if placed in Parallel. I understand adding a MPPT would be better for my solar systems. However, I now have two systems; a 400w from (4 100w solar panel's) and I want to add a small 400w turbine to the same power bank. Can this be done safely. Running a turbine and 4 100w panel's together on the same battery bank using a wanderer and another 30 amp controller with a LCD display. Furthermore, do you know of any videos of people doing what I am trying to do. I haven't found anything on YouTube yet.
I don't think you can do that, You will still have only 30a not 60a....... But I haven't done that or read about doing that so I'm not 100% sure...
Jul 16, 2018 17:51:48 GMT Guest said:
Please post at the new forum that Admin monitors renogy.boards.net/board/1/general-discussion
charging from multiple sources is not a problem.
But I don't think that was his question is making a 30a into a 60a a problem???
Jul 17, 2018 0:05:00 GMT Guest said:
I think it was his question.
Wind controllers may have a need for a diversion load when there is more power than the batts will accept.
It may have??
I'm still going to say no but what the heck do I know?? Try it all you will do is burn out the 2 30a CC or it will work.... But I don't think I would go with more panels for sure...